# Lucid Gravity Wrap in Sacramento, CA — Color Change, Fleet & PPF
Source: https://artprintingshop.com/wraps/lucid-gravity/
> Lucid Gravity wrap in Sacramento — color change, commercial, and paint protection. Priced by size, not badge. From $4,150. In-house install, 60-day workmanship warranty. Free estimate.
# Lucid Gravity Wrap in Sacramento
320 sq ftwrap surface area
5–7 yrcast-vinyl lifespan
full-sizesize class
By sizepriced, not by badge
Gravity owners wrap for two reasons that are specific to this car: protecting that long, uninterrupted single-pane glass canopy and curved nose from rock chips on the way to Tahoe, and changing up Lucid's limited launch palette (Cosmos Silver, Stellar White, Aurora Green, Fathom Blue, Supernova Bronze) without a respray that kills resale. Because the Gravity is a low-volume EV that almost nobody sees on Sacramento roads, a color-shift or satin wrap turns an already rare car into a genuine one-off, which is the whole point for this buyer.
[**Get a quote for your Gravity →**](#quote) · [Full Get Started form](/get-started/)
## What a Lucid Gravity wrap costs
The Gravity is a **full-size** vehicle — roughly **320 sq ft** of wrappable surface. A full color change starts from **$4,150**, with lettering and partials from **$550** — **$17/sq ft** up to 50 sq ft, **$15** up to 100, **$13** for larger jobs, **$550** minimum, never a flat badge rate. The price tracks square footage and install hours on the Gravity itself — not the badge on the trunk.
| Gravity service | Starts at |
|---|
| Full color-change wrap | From $4,150 |
| Lettering & partial / decals | From $550 |
| Vinyl removal (old wrap) | $75 / hour |
Model-year note. The 2025-2026 Gravity is all first-generation with the same body and front light-bar fascia, so die-lines carry straight across both years with no mid-cycle refresh to break templates. The practical 2025-to-2026 split is trim and rollout sequence (Grand Touring first, then Touring) rather than sheet metal, so wrap templates cut for an early Grand Touring fit a later Touring of the same body. Tell us your year so we cut and quote to the right die-lines.
## Wrapping a Lucid Gravity: panels & install
The Gravity's body is dominated by very large, gently crowned door and quarter panels with minimal hard creases, so big sheets lay down clean but the long roof-to-hatch glass run and the wraparound front light bar fascia force tight inlays and precise relief cuts rather than simple panel-edge wraps. The flush door handles, frameless glass, and the sloping liftgate seam all need individual templating, and the lower rocker/fender transition has enough compound curve to demand post-heat on the recessed edges.
## Finishes for your Gravity
Satin or a satin color-shift suits the Gravity best: the car's smooth, low-crease surfaces and that uninterrupted greenhouse read as one continuous form, and a satin finish flatters those large flat planes far better than gloss, which broadcasts every wave and orange-peel reflection across the long doors. Full matte is the one to avoid on a daily EV like this, since the soft front-end curves and rocker areas pick up the most road grime and matte is the hardest to keep clean. Preview a finish on your exact Gravity in our free [design visualizer](/get-started/) — it's a starting point, and a real installer finalizes every wrap on production die-lines.
## Owner tip for your Gravity
From our install bench. The Gravity's long, glassy roof and that sweeping rear quarter make satin PPF a smart pick over color-change vinyl here. Have us hand-wrap the front trunk shutline and the flush door handles separately; those tight, frameless-glass edges are where lifting starts if rushed.
## Lucid Gravity wraps we've done
See more in the [portfolio](/portfolio/), or explore all [Tesla & EV wraps](/service/tesla-ev-wraps/). See all [Lucid wraps](/wraps/lucid/). Comparing models? See [Tesla Model 3](/wraps/tesla-model-3/), [Tesla Model Y](/wraps/tesla-model-y/), [Tesla Model S](/wraps/tesla-model-s/).
## Get your Gravity wrap quote
Tell us the year and finish you're after and we'll send a real, size-based price — fair and transparent, no months-long backlog. We serve the whole Sacramento metro from our College Oak Dr shop.
Art Printing Vehicle Wraps
5051 College Oak Dr Suite C, Sacramento, CA 95841
Phone: (916) 532-1891 · Mon–Fri 9:00 AM – 6:00 PM
[**Start your Gravity estimate**](/free-estimate/) · [(916) 532-1891](tel:+19165321891)
## Lucid Gravity wrap FAQ
### Can you wrap over the full-length glass roof or does it have to stop at the glass?
We wrap the painted body only and cut clean against the glass canopy edge; the panoramic glass itself is not wrapped, though we can add a tint or PPF strip separately. The long glass-to-pillar seam on the Gravity is one of the spots where careful inlay matters most for a finished look.
### Will wrapping interfere with the Gravity's sensors or the front light bar?
No. We template around the camera and radar housings and avoid covering the active sensor faces, and the front light bar is masked or inlaid rather than wrapped over so its output and appearance stay unchanged. None of this touches the car's electronics or driver-assist function.
### How much does it cost to wrap a Lucid Gravity?
A full color-change wrap on a Gravity — about 320 sq ft of full-size surface — starts from $4,150, with partials and lettering from $550. Coverage, finish, and how complex the design is move the number — the badge never does. Get a real number on our Get Started form.
### How long does a Gravity wrap last, and does it come off clean?
A quality cast-vinyl wrap on a Gravity lasts about 5–7 years with care. EV clearcoats like the Gravity's run thin from the factory, so the film shields the paint underneath — peel it later and the original finish is better off than the bare panels. Every install carries a 60-day workmanship warranty.
