Lucid Gravity Wrap in Sacramento
Updated
Gravity owners wrap for two reasons that are specific to this car: protecting that long, uninterrupted single-pane glass canopy and curved nose from rock chips on the way to Tahoe, and changing up Lucid's limited launch palette (Cosmos Silver, Stellar White, Aurora Green, Fathom Blue, Supernova Bronze) without a respray that kills resale. Because the Gravity is a low-volume EV that almost nobody sees on Sacramento roads, a color-shift or satin wrap turns an already rare car into a genuine one-off, which is the whole point for this buyer.
Get a quote for your Gravity → · Full Get Started form
How much does it cost to wrap a Lucid Gravity?
$4,150 is where a Lucid Gravity wrap starts in Sacramento. Price follows the 320 sq ft we actually cover, at $13–$17 per sq ft with a $550 floor, so partial coverage costs proportionally less than a full skin.
The Gravity is a full-size vehicle — roughly 320 sq ft of wrappable surface. A full color change starts from $4,150, with lettering and partials from $550 — $17/sq ft up to 50 sq ft, $15 up to 100, $13 for larger jobs, $550 minimum, never a flat badge rate. The price tracks square footage and install hours on the Gravity itself — not the badge on the trunk.
| Gravity service | Starts at |
|---|---|
| Full color-change wrap | From $4,150 |
| Lettering & partial / decals | From $550 |
| Vinyl removal (old wrap) | $75 / hour |
| Coverage on a Gravity | Area covered | Starts at |
|---|---|---|
| Full color change | 320 sq ft | From $4,150 |
| Partial wrap | 160 sq ft | From $2,100 |
| Lettering & decals | 64 sq ft | From $850 |
How long does it take to wrap a Lucid Gravity?
The Gravity's body is dominated by very large, gently crowned door and quarter panels with minimal hard creases, so big sheets lay down clean but the long roof-to-hatch glass run and the wraparound front light bar fascia force tight inlays and precise relief cuts rather than simple panel-edge wraps. The flush door handles, frameless glass, and the sloping liftgate seam all need individual templating, and the lower rocker/fender transition has enough compound curve to demand post-heat on the recessed edges.
Plan on 1–3 days in the bay for a Gravity, plus 2–3 business days of printing beforehand. Handles, badges and trim come off so film wraps into the full-size body's recesses; every stretched edge is post-heated so the vinyl keeps its shape.
Which wrap finish is best for a Lucid Gravity?
Satin or a satin color-shift suits the Gravity best: the car's smooth, low-crease surfaces and that uninterrupted greenhouse read as one continuous form, and a satin finish flatters those large flat planes far better than gloss, which broadcasts every wave and orange-peel reflection across the long doors. Full matte is the one to avoid on a daily EV like this, since the soft front-end curves and rocker areas pick up the most road grime and matte is the hardest to keep clean.
Finishes for a Gravity are priced identically per sq ft — gloss, satin, matte, chrome-delete or colour-shift. All are cast film (3M 2080 or Avery Supreme), rated 5–7 years here; satin hides dust and swirls best, matte is the most dramatic and least forgiving. All of them want the same care: pH-neutral hand wash, never a brush tunnel, and no wax or petroleum-based products. Preview a finish on your exact Gravity in our free design visualizer — it's a starting point, and a real installer finalizes every wrap on production die-lines.
Lucid Gravity wraps we've done
See more in the portfolio, or explore all Tesla & EV wraps. Want to price other coverage levels yourself? Open the Lucid Gravity wrap cost calculator. See all Lucid wraps. Comparing models? See Lucid Air, Lucid, Genesis GV70.
Get your Gravity wrap quote
Tell us the year and finish you're after and we'll send a real, size-based price — fair and transparent, no months-long backlog. We serve the whole Sacramento metro from our College Oak Dr shop.
5051 College Oak Dr Suite C, Sacramento, CA 95841
Phone: (916) 532-1891 · Mon–Fri 9:00 AM – 6:00 PM
Start your Gravity estimate · (916) 532-1891
Lucid Gravity wrap FAQ
Can you wrap over the full-length glass roof or does it have to stop at the glass?
We wrap the painted body only and cut clean against the glass canopy edge; the panoramic glass itself is not wrapped, though we can add a tint or PPF strip separately. The long glass-to-pillar seam on the Gravity is one of the spots where careful inlay matters most for a finished look.
Will wrapping interfere with the Gravity's sensors or the front light bar?
No. We template around the camera and radar housings and avoid covering the active sensor faces, and the front light bar is masked or inlaid rather than wrapped over so its output and appearance stay unchanged. None of this touches the car's electronics or driver-assist function.
Is a partial wrap cheaper than a full wrap on a Gravity?
Yes, and proportionally so. Coverage is what you pay for: a full colour change on a Gravity covers about 320 sq ft, a partial roughly half that, and lettering or decals around a fifth. The per-square-foot rate is identical — $17 up to 50 sq ft, $15 up to 100, $13 above, with a $550 minimum — so half the coverage really is close to half the price. Coverage, finish, and how complex the design is move the number — the badge never does. Get a real number on our Get Started form.
How long does a Gravity wrap last, and does it come off clean?
A quality cast-vinyl wrap on a Gravity lasts about 5–7 years with care. EV clearcoats like the Gravity's run thin from the factory, so the film shields the paint underneath — peel it later and the original finish is better off than the bare panels. Every install carries a 60-day workmanship warranty.