Nissan NV200 Wrap in Sacramento
Updated
NV200s get wrapped because they're the cheapest blank-canvas cargo van a small business buys — plumbers, florists, locksmiths, last-mile couriers — and their tall, near-vertical slab sides are huge uninterrupted billboards at eye level in tight city traffic. The unique angle is fleet-matching at low cost: the flat sliding-door panels on both sides give symmetrical, repeatable logo placement, so a two- or three-van fleet looks identical without custom layout per vehicle. Because it's a compact van, a single wrap reads cleanly from a parked curbside position where a full-size Transit or ProMaster would be too long to photograph in one frame.
Get a quote for your NV200 → · Full Get Started form
How much does it cost to wrap a Nissan NV200?
Wrapping a NV200 costs from $650. We measure the mid-size body at roughly 280 sq ft and bill that area at $13–$17 per sq ft — never a flat badge rate. 2013–2021 model years all quote the same way.
The NV200 is a mid-size vehicle — roughly 280 sq ft of wrappable surface. Commercial graphics and lettering start from $650, and a full color change is priced by the area we cover — $17/sq ft up to 50 sq ft, $15 up to 100, $13 for larger jobs, $550 minimum, never a flat badge rate. That's quoted off the NV200's real surface area and time on the bench, so a same-size sedan costs the same as a Tesla — no badge tax.
| NV200 service | Starts at |
|---|---|
| Commercial graphics & lettering | From $650 |
| Full color-change wrap | Priced by size |
| Vinyl removal (old wrap) | $75 / hour |
| Coverage on a NV200 | Area covered | Starts at |
|---|---|---|
| Full color change | 280 sq ft | From $650 |
| Partial wrap | 140 sq ft | From $550 |
| Lettering & decals | 56 sq ft | From $550 |
How long does it take to wrap a Nissan NV200?
The body is dominated by large flat verticals — both sliding cargo doors, the lower body sides, and the twin rear barn doors — which wrap fast and clean, but the deep window-area recesses, the sharp wheel-arch lips, and the textured black plastic bumpers and lower cladding are the real time sinks and need either separate panels or careful exclusion. The factory roof has raised channel rails and a slight crown, so roof graphics require relief cuts along those ribs rather than a single sheet.
A NV200 install runs 1–3 days. Roughly 70% of that is preparation — wash, clay-bar, solvent wipe, hardware removal — and 30% is laying film across the 280 sq ft of panels, one panel at a time.
Which wrap finish is best for a Nissan NV200?
Gloss is the right call for almost every NV200 because the body has so little sculpting that matte or satin flatten it into a dull box, while gloss keeps brand colors punchy and survives daily commercial washing far better. Reserve matte or satin only for a deliberate premium/utility look, and skip chrome and color-shift — the broad flat panels make every install seam and squeegee mark glaringly visible in those finishes.
Any finish on a NV200 uses the same cast vinyl and the same rate: 3M 2080 or Avery Dennison Supreme, 5–7 year rating in Sacramento sun. Choose by upkeep, not budget — gloss reads closest to factory paint, matte needs the most careful washing. Chrome is the highest-maintenance of the group; every finish needs a pH-neutral hand wash and no wax, and a fresh wrap stays unwashed for 48–72 hours. Preview a finish on your exact NV200 in our free design visualizer — it's a starting point, and a real installer finalizes every wrap on production die-lines.
Nissan NV200 wraps we've done
See more in the portfolio, or explore all truck & van wraps. Want to price other coverage levels yourself? Open the Nissan NV200 wrap cost calculator. See all Nissan wraps. Comparing models? See Nissan, Nissan Leaf, Ford Transit.
Get your NV200 wrap quote
Tell us the year and finish you're after and we'll send a real, size-based price — fair and transparent, no months-long backlog. We serve the whole Sacramento metro from our College Oak Dr shop.
5051 College Oak Dr Suite C, Sacramento, CA 95841
Phone: (916) 532-1891 · Mon–Fri 9:00 AM – 6:00 PM
Start your NV200 estimate · (916) 532-1891
Nissan NV200 wrap FAQ
Can you wrap the textured black bumpers and lower body cladding on my NV200?
We generally don't, and you shouldn't want us to — vinyl struggles to bond and stay down on that grained plastic, so it lifts at the edges within months. We wrap the painted sheet metal up to the cladding line and leave the black trim as a factory contrast, which actually looks intentional on this van.
Will a wrap fit over the sliding doors and still let them open and close normally?
Yes. We wrap each sliding door as its own panel and knife the vinyl cleanly in the door gaps and at the track so nothing binds or peels when the door travels. The flat door faces are the best part of the NV200 to wrap, so that's where your main logo and message go.
Is a partial wrap cheaper than a full wrap on a NV200?
Yes, and proportionally so. Coverage is what you pay for: a full colour change on a NV200 covers about 280 sq ft, a partial roughly half that, and lettering or decals around a fifth. The per-square-foot rate is identical — $17 up to 50 sq ft, $15 up to 100, $13 above, with a $550 minimum — so half the coverage really is close to half the price. What changes it is how much of the NV200 you cover and which finish you choose, not the make. Get a real number on our Get Started form.
How long does a NV200 wrap last, and does it come off clean?
A quality cast-vinyl wrap on a NV200 lasts about 5–7 years with care. On a high-use NV200, sealed edges around the doors and panels are what make it last; at end of life it removes paint-safe. Every install carries a 60-day workmanship warranty.