Polestar owners in Sacramento usually walk in wanting to keep things clean and understated. The Polestar 2 and 3 wear flat, low-gloss factory colors like Snow and Thunder, so the most common requests we see are satin or matte color changes that hold that minimalist look, plus chrome and badge delete to black out the trim and window surrounds. These are EVs with the soft, water-based factory paint Polestar uses, so we work patiently around the sharp shoulder lines and tight panel gaps, post-heating every wrapped edge so it stays down. Some clients want full PPF or a partial front-end clear bra to guard against I-80 rock chips. Whatever the plan, we lay premium cast vinyl by hand and back it with a 60-day workmanship warranty.
Polestar wraps in Sacramento start at $3,250. We wrap 2 Polestar models — 2, 3 — each priced by measured area at $13–$17 per sq ft, $550 minimum, installed in 1–3 days.
Polestar wraps start from $3,250 depending on the model and coverage — every Polestar priced by the area we actually cover ($13–$17/sq ft, $550 minimum), never a flat badge rate.
Polestar 2 wrap — The minimalist EV fastback — clean Scandinavian panels that look sharp in satin and stealth matte, fully reversible.
Polestar 3 wrap — The performance EV SUV — smooth Scandinavian panels that look sharp in satin and stealth, paint protected.
How much does it cost to wrap a Polestar?
Polestar wraps start at $3,250 and are priced by measured area — $17/sq ft up to 50 sq ft, $15 up to 100, $13 above, with a $550 minimum. You pay for the surface we actually cover, not the badge, so the number below moves with body size rather than sticker price:
Size
Polestar examples
From
mid-size
2
From $3,250
full-size
3
From $4,150
Three limits that apply to every Polestar we wrap.1. Horizontal panels age fastest — 3M rates Series 2080 at 7 years on vertical surfaces but 2 years on the roof and hood in our climate zone. 2. Film covers paint, it does not repair it: over peeling clear coat or filler, removal can lift the surface, so every Polestar is inspected before we quote. 3. Taking an old wrap off is billed separately at $75 per hour — cheap calendared vinyl left past its life takes the longest.
Pick your exact Polestar above — each model page has size-based pricing, panel-and-install notes, and a quote form with the model already selected. Or explore all Tesla & EV wraps.
Why wrap your Polestar with Art Printing Vehicle Wraps
Priced by size & surface area — never a badge tax
60-day workmanship warranty on every install
Premium 3M & Avery Dennison cast vinyl, cut to your model's die-lines
Local College Oak Dr shop serving the whole Sacramento metro
Polestar wraps — FAQ
Can you do just a chrome delete on my Polestar 3 instead of a full wrap?
Absolutely. Chrome delete is one of the most popular Polestar requests, and the 3 has the window surrounds and trim accents that look sharp blacked out. We wrap those pieces in satin or gloss black, post-heat the edges, and leave the body untouched. It's a clean way to tighten the look without committing to a full color change.
Will wrapping my Polestar 2 damage its soft factory paint when I remove it later?
When the original paint is healthy and factory-applied, our premium cast vinyl removes cleanly without pulling color. Polestar uses softer EV paint, so we heat panels gently on install and removal and avoid aggressive tools. We back every install with a 60-day workmanship warranty. If your car has prior repaint or chipped areas, we'll flag those before we start.
Art Printing Vehicle Wraps
5051 College Oak Dr Suite C, Sacramento, CA 95841
Phone: (916) 532-1891 · Mon–Fri 9:00 AM – 6:00 PM
