Subaru BRZ Wrap in Sacramento
Updated
Owners wrap the BRZ mostly because it ships in a thin palette of solid colors with very little factory variety, so a wrap is the easiest way to stand out at a meet without touching the resale-friendly factory paint underneath. It is also a track-and-canyon car, so a lot of BRZ wraps are partials covering the hood, roof, and rear quarters to hide rock chips and tar from spirited driving rather than a full color change. The unique angle is that it is a light, low car with a long single-curve hood and fastback roofline that takes wrap cleanly, but the front lip and rear diffuser see real road abuse that a wrap protects.
Get a quote for your BRZ → · Full Get Started form
How much does it cost to wrap a Subaru BRZ?
A Subaru BRZ wrap in Sacramento starts at $2,850 for a full colour change. The BRZ measures about 220 sq ft of wrappable surface, billed at $13–$17 per sq ft with a $550 minimum. Install takes 1–3 days.
The BRZ is a compact vehicle — roughly 220 sq ft of wrappable surface. A full color change starts from $2,850, with lettering and partials from $550 — $17/sq ft up to 50 sq ft, $15 up to 100, $13 for larger jobs, $550 minimum, never a flat badge rate. That's quoted off the BRZ's real surface area and time on the bench, so a same-size sedan costs the same as a Tesla — no badge tax.
| BRZ service | Starts at |
|---|---|
| Full color-change wrap | From $2,850 |
| Lettering & partial / decals | From $550 |
| Vinyl removal (old wrap) | $75 / hour |
| Coverage on a BRZ | Area covered | Starts at |
|---|---|---|
| Full color change | 220 sq ft | From $2,850 |
| Partial wrap | 110 sq ft | From $1,450 |
| Lettering & decals | 44 sq ft | From $550 |
How long does it take to wrap a Subaru BRZ?
The BRZ is a true two-door coupe, so each side is one long door skin with a sweeping shoulder line and a tight tuck along the rocker that needs heat and overlap rather than a clean wrap-and-tuck. The fastback roof flows into the rear glass and decklid with a pronounced ducktail spoiler on the trunk lip, and the bulged hood scoop area plus the deep front-bumper vents are the spots where seams and relief cuts have to be planned.
A BRZ install runs 1–3 days. Roughly 70% of that is preparation — wash, clay-bar, solvent wipe, hardware removal — and 30% is laying film across the 220 sq ft of panels, one panel at a time.
Which wrap finish is best for a Subaru BRZ?
Satin or matte suits the BRZ best because the car's slab sides and simple curves read as flat panels under gloss but gain depth in a low-sheen finish that hugs the coupe's lines. Color-shift is also a strong pick on this body since the long hood and fastback roof give the flop colors room to travel as the car moves.
Any finish on a BRZ uses the same cast vinyl and the same rate: 3M 2080 or Avery Dennison Supreme, 5–7 year rating in Sacramento sun. Choose by upkeep, not budget — gloss reads closest to factory paint, matte needs the most careful washing. Chrome is the highest-maintenance of the group; every finish needs a pH-neutral hand wash and no wax, and a fresh wrap stays unwashed for 48–72 hours. Preview a finish on your exact BRZ in our free design visualizer — it's a starting point, and a real installer finalizes every wrap on production die-lines.
Subaru BRZ wraps we've done
See more in the portfolio, or explore all color-change wraps. Want to price other coverage levels yourself? Open the Subaru BRZ wrap cost calculator. See all Subaru wraps. Comparing models? See Subaru, Subaru WRX, Nissan 370Z.
Get your BRZ wrap quote
Tell us the year and finish you're after and we'll send a real, size-based price — fair and transparent, no months-long backlog. We serve the whole Sacramento metro from our College Oak Dr shop.
5051 College Oak Dr Suite C, Sacramento, CA 95841
Phone: (916) 532-1891 · Mon–Fri 9:00 AM – 6:00 PM
Start your BRZ estimate · (916) 532-1891
Subaru BRZ wrap FAQ
Will a wrap fit over the BRZ's ducktail spoiler and rear bumper without lifting?
Yes, but the trunk-lip ducktail and the lower diffuser fins are the most likely edges to lift over time, so they get extra post-heat and the wrap is wrapped well past the edge into the underside. Keeping the car out of a hot wash for the first week helps those tight edges set.
Should I wrap my 2013 BRZ or my 2023 BRZ differently?
They are wrapped with completely different templates because the 2022-and-up second generation has a wider front clip, different fenders, and a reshaped bumper, so material usage and seam placement change. A first-gen car also has the simpler pre-2017 or post-2017 fascia, which is why the model year has to be confirmed before cutting.
Is a partial wrap cheaper than a full wrap on a BRZ?
Yes, and proportionally so. Coverage is what you pay for: a full colour change on a BRZ covers about 220 sq ft, a partial roughly half that, and lettering or decals around a fifth. The per-square-foot rate is identical — $17 up to 50 sq ft, $15 up to 100, $13 above, with a $550 minimum — so half the coverage really is close to half the price. What changes it is how much of the BRZ you cover and which finish you choose, not the make. Get a real number on our Get Started form.
How long does a BRZ wrap last, and does it come off clean?
A quality cast-vinyl wrap on a BRZ lasts about 5–7 years with care. Keep a BRZ out of all-day sun and off harsh car-wash brushes and it holds color for years; on healthy paint it comes off with no residue. Every install carries a 60-day workmanship warranty.