Mitsubishi Eclipse Cross Wrap in Sacramento
Updated
Eclipse Cross owners wrap mostly to break up the busy factory styling, since the heavily creased flanks and "Dynamic Shield" nose read as fussy in the limited palette Mitsubishi offered (lots of Red Diamond, white, and grey). A color change lets a daily-driver crossover stand out without the cost or commitment of repaint, and it doubles as paint protection on a vehicle that spends its life in Sacramento sun and gravel-road grit. The unique angle: this is a value crossover, so owners care about a clean, durable result more than show-car perfection, and they often add a partial wrap or accent panels rather than a full color change.
Get a quote for your Eclipse Cross → · Full Get Started form
How much does it cost to wrap a Mitsubishi Eclipse Cross?
Expect from $3,250 to wrap a Eclipse Cross. It is a mid-size vehicle — about 250 sq ft of panels — and Sacramento pricing runs $13–$17 per sq ft, $550 minimum, with print production adding 2–3 business days before install.
The Eclipse Cross is a mid-size vehicle — roughly 250 sq ft of wrappable surface. A full color change starts from $3,250, with lettering and partials from $550 — $17/sq ft up to 50 sq ft, $15 up to 100, $13 for larger jobs, $550 minimum, never a flat badge rate. The price tracks square footage and install hours on the Eclipse Cross itself — not the badge on the trunk.
| Eclipse Cross service | Starts at |
|---|---|
| Full color-change wrap | From $3,250 |
| Lettering & partial / decals | From $550 |
| Vinyl removal (old wrap) | $75 / hour |
| Coverage on a Eclipse Cross | Area covered | Starts at |
|---|---|---|
| Full color change | 250 sq ft | From $3,250 |
| Partial wrap | 125 sq ft | From $1,650 |
| Lettering & decals | 50 sq ft | From $650 |
How long does it take to wrap a Mitsubishi Eclipse Cross?
The body is defined by two deep character lines running the length of each door plus a pronounced wheel-arch flare, so material has to be relieved and post-heated into those channels or it tents and lifts at the crease apex. The first-gen split-tailgate with its mid-glass LED bar is the trickiest zone — the rear hatch needs to be panelled in two sections around the light bar and trim, and the sharp Dynamic Shield front bumper has multiple convex/concave transitions that demand seams or inlays rather than one continuous sheet.
Plan on 1–3 days in the bay for a Eclipse Cross, plus 2–3 business days of printing beforehand. Handles, badges and trim come off so film wraps into the mid-size body's recesses; every stretched edge is post-heated so the vinyl keeps its shape.
Which wrap finish is best for a Mitsubishi Eclipse Cross?
Satin or matte suits the Eclipse Cross best — the flat finish calms down those aggressive body creases and the busy nose, where a high-gloss film would only amplify every reflection and highlight the panel fussiness. For owners who want presence, a subtle color-shift (blue-to-purple or gunmetal-to-bronze) plays nicely off the angular surfacing without looking gaudy on a compact crossover.
Finishes for a Eclipse Cross are priced identically per sq ft — gloss, satin, matte, chrome-delete or colour-shift. All are cast film (3M 2080 or Avery Supreme), rated 5–7 years here; satin hides dust and swirls best, matte is the most dramatic and least forgiving. All of them want the same care: pH-neutral hand wash, never a brush tunnel, and no wax or petroleum-based products. Preview a finish on your exact Eclipse Cross in our free design visualizer — it's a starting point, and a real installer finalizes every wrap on production die-lines.
Mitsubishi Eclipse Cross wraps we've done
See more in the portfolio, or explore all color-change wraps. Want to price other coverage levels yourself? Open the Mitsubishi Eclipse Cross wrap cost calculator. See all Mitsubishi wraps. Comparing models? See Mitsubishi, Mitsubishi Outlander, Mazda CX-5.
Get your Eclipse Cross wrap quote
Tell us the year and finish you're after and we'll send a real, size-based price — fair and transparent, no months-long backlog. We serve the whole Sacramento metro from our College Oak Dr shop.
5051 College Oak Dr Suite C, Sacramento, CA 95841
Phone: (916) 532-1891 · Mon–Fri 9:00 AM – 6:00 PM
Start your Eclipse Cross estimate · (916) 532-1891
Mitsubishi Eclipse Cross wrap FAQ
My Eclipse Cross has the rear light bar across the back glass — can the tailgate still be wrapped?
Yes, but only the painted sheet metal gets film, not the glass or the LED bar itself. On the first-gen split-tailgate we panel the upper and lower sections separately and trim cleanly around the light bar and its trim, so the bar stays fully functional and the seams sit in the natural body gaps.
Will a wrap stick to the textured black plastic on the lower doors and wheel arches?
The lower cladding and arch flares are grained plastic, and standard wrap film does not bond well to heavy texture long-term — it tends to lift at the edges. We usually leave that cladding factory-textured (it already looks intentional) or, if you want it color-matched, prep it differently than the painted panels; most owners just wrap the painted body and keep the black trim as contrast.
Is a partial wrap cheaper than a full wrap on a Eclipse Cross?
Yes, and proportionally so. Coverage is what you pay for: a full colour change on a Eclipse Cross covers about 250 sq ft, a partial roughly half that, and lettering or decals around a fifth. The per-square-foot rate is identical — $17 up to 50 sq ft, $15 up to 100, $13 above, with a $550 minimum — so half the coverage really is close to half the price. Coverage, finish, and how complex the design is move the number — the badge never does. Get a real number on our Get Started form.
How long does a Eclipse Cross wrap last, and does it come off clean?
A quality cast-vinyl wrap on a Eclipse Cross lasts about 5–7 years with care. Garaged and hand-washed, a Eclipse Cross holds the upper end of that range; baking in the Sacramento sun pushes it lower. Removal stays clean and paint-safe. Every install carries a 60-day workmanship warranty.