Chevrolet Silverado Wrap in Sacramento
Updated
Silverado owners wrap for two distinct reasons that pull in opposite directions: fleet and trade operators (contractors, landscapers, service techs) want logo-laden work-truck graphics across a huge, flat slab side, while enthusiasts with LT Trail Boss, RST, and High Country trims want a color change that hides the busy chrome and two-tone factory plastic. The unique angle here is sheer area plus segmentation by box length and cab — a Regular Cab/Long Box and a Crew Cab/Short Box are completely different layouts, so the bed sides and rear door panels are the real canvas, not a single uniform surface.
Get a quote for your Silverado → · Full Get Started form
How much does it cost to wrap a Chevrolet Silverado?
Expect from $650 to wrap a Silverado. It is a full-size vehicle — about 345 sq ft of panels — and Sacramento pricing runs $13–$17 per sq ft, $550 minimum, with print production adding 2–3 business days before install.
The Silverado is a full-size vehicle — roughly 345 sq ft of wrappable surface. Commercial graphics and lettering start from $650, and a full color change is priced by the area we cover — $17/sq ft up to 50 sq ft, $15 up to 100, $13 for larger jobs, $550 minimum, never a flat badge rate. You pay for the film and the labor it takes to cover your Silverado, never a flat number copied from a bigger or smaller vehicle.
| Silverado service | Starts at |
|---|---|
| Commercial graphics & lettering | From $650 |
| Full color-change wrap | Priced by size |
| Vinyl removal (old wrap) | $75 / hour |
| Coverage on a Silverado | Area covered | Starts at |
|---|---|---|
| Full color change | 345 sq ft | From $650 |
| Partial wrap | 173 sq ft | From $550 |
| Lettering & decals | 69 sq ft | From $550 |
How long does it take to wrap a Chevrolet Silverado?
The bed is the install challenge: deep vertical stake-pocket channels, the rolled top bed rail, and the steel/composite bedside on later trucks all need relief cuts and post-heat, and the tailgate has recessed CHEVROLET lettering (2019+) plus a power-release handle pocket that must be wrapped or knifed around. Door handles, the sail panel between the cab and bed, and the wide flat lower rocker cladding on Z71/Trail Boss trims are the other spots that eat install time.
Wrapping your Silverado takes 1–3 days in our Sacramento shop after 2–3 business days of print production. The 345 sq ft of panels are wrapped individually, with film tucked into edges and recesses rather than trimmed flush, so nothing lifts at the corners.
Which wrap finish is best for a Chevrolet Silverado?
Satin or matte black reads best on the Silverado because the slab-sided bed and big door skins are flat enough to show off a uniform low-sheen finish without orange-peel telegraphing, and it visually mutes the heavy factory chrome grille and bumpers that owners often dislike. Gloss color-change works too on monochrome trims, but skip high-maintenance gloss white over fleet trucks that live on gravel and job sites.
Every Silverado finish is cut from 3M Wrap Film Series 2080 or Avery Dennison Supreme Wrapping Film — cast vinyl rated 5–7 years in Central Valley sun. Gloss, satin, matte, chrome-delete and colour-shift all cost the same per sq ft; the finish changes the look, not the price. Whichever you pick, upkeep is the same: hand wash with pH-neutral soap, no wax or polish, and leave a fresh wrap unwashed for 48–72 hours while the adhesive cures. Preview a finish on your exact Silverado in our free design visualizer — it's a starting point, and a real installer finalizes every wrap on production die-lines.
Chevrolet Silverado wraps we've done
See more in the portfolio, or explore all truck & van wraps. Want to price other coverage levels yourself? Open the Chevrolet Silverado wrap cost calculator. See all Chevrolet wraps. Comparing models? See GMC Sierra, Chevrolet Tahoe, RAM 1500.
Get your Silverado wrap quote
Tell us the year and finish you're after and we'll send a real, size-based price — fair and transparent, no months-long backlog. We serve the whole Sacramento metro from our College Oak Dr shop.
5051 College Oak Dr Suite C, Sacramento, CA 95841
Phone: (916) 532-1891 · Mon–Fri 9:00 AM – 6:00 PM
Start your Silverado estimate · (916) 532-1891
Chevrolet Silverado wrap FAQ
Can you wrap just the bed and doors to match my company graphics instead of the whole truck?
Yes — partial wraps and cut-graphics on the bed sides, doors, and tailgate are the most common Silverado fleet job because those panels are large and flat. We map the layout to your specific cab and box length so logos sit centered and clear the stake-pocket channels.
Will a wrap stick to the textured plastic cladding on my Trail Boss or Z71?
Vinyl bonds to the smooth painted body panels reliably, but the grained black fender flares and rocker cladding are textured plastic that vinyl will not hold long-term, so those are typically left factory-black or finished separately. We confirm which trim pieces are paintable surface versus textured plastic before quoting coverage.
Is a partial wrap cheaper than a full wrap on a Silverado?
Yes, and proportionally so. Coverage is what you pay for: a full colour change on a Silverado covers about 345 sq ft, a partial roughly half that, and lettering or decals around a fifth. The per-square-foot rate is identical — $17 up to 50 sq ft, $15 up to 100, $13 above, with a $550 minimum — so half the coverage really is close to half the price. Final price depends on coverage, finish, and design — never a flat badge price. Get a real number on our Get Started form.
How long does a Silverado wrap last, and does it come off clean?
A quality cast-vinyl wrap on a Silverado lasts about 5–7 years with care. A Silverado that lives outside lands at the lower end of that range; a garaged one holds the top — either way removal is paint-safe. Every install carries a 60-day workmanship warranty.