Lincoln Navigator Wrap in Sacramento
Updated
Navigator owners wrap to protect a six-figure flagship SUV whose large, flat, slab-sided body panels are a magnet for rock chips and parking-lot dings, and to set a vehicle that's common in black, white, and silver apart from every other one in the school pickup line. The unique angle on a Navigator is sheer scale: at roughly 380 square feet of wrappable area across the longest body in Lincoln's lineup, it reads almost like a small fleet truck, so a clean color-change makes a far bigger visual statement than it would on a midsize crossover.
Get a quote for your Navigator → · Full Get Started form
How much does it cost to wrap a Lincoln Navigator?
Wrapping a Navigator costs from $4,600. We measure the extra-large body at roughly 380 sq ft and bill that area at $13–$17 per sq ft — never a flat badge rate. 2018–2026 model years all quote the same way.
The Navigator is a extra-large vehicle — roughly 380 sq ft of wrappable surface. A full color change starts from $4,600, with lettering and partials from $550 — $17/sq ft up to 50 sq ft, $15 up to 100, $13 for larger jobs, $550 minimum, never a flat badge rate. You pay for the film and the labor it takes to cover your Navigator, never a flat number copied from a bigger or smaller vehicle.
| Navigator service | Starts at |
|---|---|
| Full color-change wrap | From $4,600 |
| Lettering & partial / decals | From $550 |
| Vinyl removal (old wrap) | $75 / hour |
| Coverage on a Navigator | Area covered | Starts at |
|---|---|---|
| Full color change | 380 sq ft | From $4,600 |
| Partial wrap | 190 sq ft | From $2,300 |
| Lettering & decals | 76 sq ft | From $900 |
How long does it take to wrap a Lincoln Navigator?
The Navigator's strength for an installer is its long, broad, relatively flat door skins, hood, and roof, which take large single panels with minimal seaming, but the heavily chromed grille surround, the bright beltline trim, and the wraparound full-width tail light bar all demand careful inlay or knife work rather than a wrap-over. The big curved D-pillar/quarter panel transition and the deep body-side character line below the windows are the spots where heat and post-heating matter most to prevent lift on this body.
Wrapping your Navigator takes 1–3 days in our Sacramento shop after 2–3 business days of print production. The 380 sq ft of panels are wrapped individually, with film tucked into edges and recesses rather than trimmed flush, so nothing lifts at the corners.
Which wrap finish is best for a Lincoln Navigator?
Satin or a deep gloss black suits the Navigator best: the slab panels and formal upright stance look most expensive in a finish that stays clean and dignified rather than flashy, and satin in particular hides the minor orange-peel and panel waviness you get on a large SUV better than high gloss does. Color-shift and chrome films are doable but fight the vehicle's luxury intent and add labor across that much square footage.
Every Navigator finish is cut from 3M Wrap Film Series 2080 or Avery Dennison Supreme Wrapping Film — cast vinyl rated 5–7 years in Central Valley sun. Gloss, satin, matte, chrome-delete and colour-shift all cost the same per sq ft; the finish changes the look, not the price. Whichever you pick, upkeep is the same: hand wash with pH-neutral soap, no wax or polish, and leave a fresh wrap unwashed for 48–72 hours while the adhesive cures. Preview a finish on your exact Navigator in our free design visualizer — it's a starting point, and a real installer finalizes every wrap on production die-lines.
Lincoln Navigator wraps we've done
See more in the portfolio, or explore all color-change wraps. Want to price other coverage levels yourself? Open the Lincoln Navigator wrap cost calculator. See all Lincoln wraps. Comparing models? See Lincoln, Lincoln Aviator, Cadillac Escalade.
Get your Navigator wrap quote
Tell us the year and finish you're after and we'll send a real, size-based price — fair and transparent, no months-long backlog. We serve the whole Sacramento metro from our College Oak Dr shop.
5051 College Oak Dr Suite C, Sacramento, CA 95841
Phone: (916) 532-1891 · Mon–Fri 9:00 AM – 6:00 PM
Start your Navigator estimate · (916) 532-1891
Lincoln Navigator wrap FAQ
Can you wrap over all the chrome trim on my Navigator, or does it have to come off?
We typically wrap the painted panels and inlay or trim around the chrome grille surround and bright beltline molding rather than wrap over them, since vinyl doesn't bond reliably long-term to bright chrome. Some smaller trim pieces can be popped off for a cleaner edge, but the main grille and tail light bar are usually worked around in place.
Will a wrap fit over the running boards and the big tail light bar?
The power running boards are mechanical and aren't wrapped; we mask to them. The full-width tail light bar is glass/lens, not a paint surface, so the wrap is knifed cleanly to its edge rather than laid across it, which keeps the lighting and any light signature fully visible.
Is a partial wrap cheaper than a full wrap on a Navigator?
Yes, and proportionally so. Coverage is what you pay for: a full colour change on a Navigator covers about 380 sq ft, a partial roughly half that, and lettering or decals around a fifth. The per-square-foot rate is identical — $17 up to 50 sq ft, $15 up to 100, $13 above, with a $550 minimum — so half the coverage really is close to half the price. Final price depends on coverage, finish, and design — never a flat badge price. Get a real number on our Get Started form.
How long does a Navigator wrap last, and does it come off clean?
A quality cast-vinyl wrap on a Navigator lasts about 5–7 years with care. Keep a Navigator out of all-day sun and off harsh car-wash brushes and it holds color for years; on healthy paint it comes off with no residue. Every install carries a 60-day workmanship warranty.