Trailer Wraps in Sacramento
· Updated
A trailer wrap is printed vinyl applied across a trailer's big flat sides and rear, turning it into a moving billboard you tow to every job and park at every event. Because those surfaces are large and flat, trailers are among the cheapest vehicles to wrap per square foot — at Art Printing Vehicle Wraps in Sacramento it runs $13–$17 per square foot, so a small enclosed trailer costs far less than a 53-foot semi. That per-square-foot honesty is the number nobody else shows you up front, and it is exactly how a trailer becomes the best advertising value you own.
We are Art Printing Vehicle Wraps on College Oak Dr in Sacramento. We wrap enclosed, cargo, utility, food, and semi trailers in-house with premium film. No surface-area guesswork — we measure your trailer and quote the real number.
The biggest rolling billboard you can own
A trailer gives you more flat advertising surface than almost anything on the road, and it works whether you are hauling it down the highway or leaving it parked on a job site for a week. Owner-operators rent that same space out — one quoted around $1,000 a month to run an ad on a trailer he was already driving. Wrap it with your own brand instead and you keep that value every mile, for one flat cost.
The math is in your favor because trailers are mostly big, flat panels. A car fights the installer with curves, bumpers, and door gaps; a trailer cooperates. That is why a trailer typically delivers the lowest cost per square foot of any wrap — maximum impact, minimum cost per inch of advertising.
What drives the price — square footage, not badge
Four things set the cost, and we are upfront about all of them:
- Square footage. This is the big one. A 14-foot enclosed trailer versus a 53-foot semi is a huge difference — a full semi can be over 1,000 square feet of vinyl across all four sides, while a small utility trailer is a quick job.
- Coverage. A full wrap costs more than cut graphics and lettering. Plenty of trailers look sharp with bold cut vinyl on a painted background for far less than a full print.
- Design complexity. Full-color photographic artwork uses more ink and design time than a clean two-color layout.
- Surface condition. A smooth-sided trailer wraps fast and clean. Rivets and seams take more labor and the right technique so edges do not lift.
We measure your actual trailer and quote against these, so the number reflects your trailer — not a one-size estimate.
Enclosed, cargo & utility trailers
Enclosed and cargo trailers are the everyday workhorses — cleaning services, contractors, sports clubs, mobile businesses. Big flat sides, easy to design for, and the most billboard-per-dollar of anything we wrap. Utility and open trailers usually get a wrapped front box, fender graphics, or lettering rather than a full skin. Whatever the type, we wrap what makes sense and skip what would be wasted film.
Semi & large trailers
A 48- or 53-foot semi trailer is a serious surface — over a thousand square feet of vinyl is normal, and the install is a real job, not an afternoon. It is also the most-seen advertising a fleet can run, racking up highway impressions all day. We handle the scale, the panel planning, and the seam-and-rivet work, and we price it honestly by the square foot so the number makes sense for the impressions it earns.
Pricing per square foot
| Trailer type | Starts at | Notes |
|---|---|---|
| Small enclosed / utility trailer | $13–$17 / sq ft | Modest surface, quick clean job |
| Mid enclosed / cargo trailer | $13–$17 / sq ft | The everyday rolling billboard |
| Cut graphics & lettering only | From $550 | Sharp look, lower cost than full print |
| Semi / 53-ft trailer (full) | $13–$17 / sq ft | 1,000+ sq ft of vinyl typical |
Running a food trailer? See food truck wraps for the storefront-specific approach. Wrapping trailers across a fleet? See fleet & commercial wraps for volume pricing.
Get a Free Estimate · (916) 532-1891
Frequently asked questions
How much does it cost to wrap a trailer?
Trailers are priced per square foot and are one of the cheapest large surfaces to wrap. A small enclosed trailer is modest; a 53-foot semi can be over 1,000 square feet of vinyl, so it costs far more. $13–$17 per square foot, measured on your actual trailer.
Are trailers cheaper to wrap than cars per square foot?
Usually yes. A car has curves and recesses that slow installs; a trailer is mostly flat panels that install faster and use film efficiently. That gives you the most advertising surface for the lowest cost per square foot.
Can you wrap an enclosed trailer with rivets and seams?
Yes. Riveted skins take more labor and the right technique to seal around every rivet, but it is routine work. A smooth-sided trailer is faster and cheaper; a riveted one costs a bit more.
How long does a trailer wrap last?
Roughly 5 to 7 years, often toward the upper end since trailers run highway miles or sit parked rather than baking in stop-and-go sun. We use premium film — cheap vinyl on a big flat surface fades unevenly fast.
Do you also wrap food trailers?
Yes — a food trailer is a storefront on wheels. See food truck wraps, or start a free estimate.
Got a trailer sitting blank? That is free advertising you are not running. Request a free quote and we will measure it and send you a per-square-foot price.
5051 College Oak Dr Suite C, Sacramento, CA 95841
Phone: (916) 532-1891
Hours: Monday–Friday, 9:00 AM – 6:00 PM